|
#1726
19th July 2023, 00:44
|
||||
|
||||
|
Was that one, very, very determined thief Makko or 60 odd thousand opportunists?
Suggest another protection scheme coupled with a dirigible lightning protector.
__________________
David V Lord Finchley tried to mend the electric light Himself. It struck him dead and serve him right It is the duty of the wealthy man To give employment to the artisan 
|
|
#1727
19th July 2023, 07:32
|
|||
|
|||
|
A bloody big roof.
|
|
#1728
20th July 2023, 20:32
|
||||
|
||||
|
Here one for you Mal.
The Old Steel Pot. The United States produced 22 million of the M1 Helmet and they were used in service from 1941 thru 1985 when it was replaced by the Kevlar version. It saw service in WW2, Korean War, Vietnam, and in the Falklands. The M1 Steel Helmet weighed in at almost 3 pounds. The Helmet fondly called the “Steel Pot” had many other uses other than protecting the head. (Below are listed other uses.) 1. Protecting the head. 2. Used as a Wash Basin and or Shaving Bowl. 3. Used as a Pillow to prop your head up. 4. As a Pot to boil water or Stew. 5. To carry water or items. 6. To take a pee in. 7. To Bail the water from out of your Fox Hole. 8. As a shovel to dig out dirt. 9. As a weapon to hit the enemy when out of ammo. 10.Used as a Flower Hanging Basket for decorating the Bunker. 11.Used as Hammer or Mallet to pound in tent Pegs. 12.To sit on when riding in a Helicopter to protect the family jewels from ground fire. Reference Item 1. and 12. Protection is everything. As for the new Kevlar helmet only item 1,3,9,10,11, and 12, apply. AJR July 2018
|
|
#1729
20th July 2023, 20:47
|
||||
|
||||
|
Yes John, good list.
Re 12, I have seen pix of that use and it occurred to me that it was just psychological - The M1s were never intended to be bullet proof!
__________________
The Mad Landsman
|
|
#1730
20th July 2023, 20:54
|
||||
|
||||
|
I have one of those John. Very useful for catching drips from the roof in the garden shed! Also, when I was selling industrial chemicals I was asked to visit a potential customer looking for a better release agent. They were producing Kevlar helmets and body armour for export to armies and police forces. The project they wanted me to help them with was part of an order for the South African Army. (This was in the 1990's.) They had produced a couple of hundred standard helmets, but needed a few dozen helmets made to a heavier spec. (i.e. more layers of Kevlar.) They had tried to make these using the same mould used for the standard helmets, but were having trouble getting a clean release. (The mould was a two part item, with a female section for the outside of the helmet, and a male section for a smooth finish on the inside.) One release agent in the range I could offer helped reduce the number of rejects, but the mouldings were still difficult to get out of the open mould. The workers had been as communicative and helpful as they could, but finally I had to ask why they needed a heavier and thicker helmet than the standard issue item. "These are for the officers," they replied.
__________________
"You do not ask a tame seagull why it needs to disappear from time to time towards the open sea. It goes. That's all." Bernard Moitessier.
|
|
#1731
20th July 2023, 20:55
|
||||
|
||||
|
There is definitely a Climate Emergency.
My barometer fell all the way down last night. I have ordered a stronger hook to hang it on.
__________________
"You do not ask a tame seagull why it needs to disappear from time to time towards the open sea. It goes. That's all." Bernard Moitessier.
|
|
#1732
21st July 2023, 08:12
|
|||
|
|||
|
Leave it on the floor, it can't fall any further.
|
|
#1733
28th August 2023, 08:52
|
||||
|
||||
|
Nurse
Quote:
one for John Rogers ATT8.jpg Last edited by OLDGIT77; 28th August 2023 at 09:05.
|
|
#1734
28th August 2023, 08:56
|
||||
|
||||
|
Beware of nurse
Last edited by OLDGIT77; 28th August 2023 at 09:03.
|
|
#1736
29th August 2023, 17:41
|
||||
|
||||
|
|
|
#1741
5th November 2023, 13:30
|
||||
|
||||
|
|
|
#1743
10th November 2023, 10:13
|
|||
|
|||
|
Is there an official conversion from furlongs to millimetrers?
|
|
#1744
10th November 2023, 11:14
|
|||
|
|||
|
Yes, furlongs is how many horses in a mile the conversion rate is 250 to 1..cant help with millimetres, hope this was helpful?
Last edited by rustytrawler; 10th November 2023 at 11:34.
|
|
#1745
10th November 2023, 11:35
|
|||
|
|||
|
Quote:
( I know ; nobody loves a smartass). There is a nice free downloadable programme named convert - I thought all engineering types knew about it....
|
|
#1746
10th November 2023, 12:17
|
||||
|
||||
|
I was taught to use standard measurements such as a "Gnat's Whisker," and use the end of your thumb to represent one and a half inches. Another "Rule of Thumb" that always guaranteed precise results was "That much plus a bit." This one was useful when setting moorings.
__________________
"You do not ask a tame seagull why it needs to disappear from time to time towards the open sea. It goes. That's all." Bernard Moitessier.
|
|
#1747
10th November 2023, 16:38
|
||||
|
||||
|
Alternatively, Ordnance Artificers had to work to within 2 thousandths of an inch, ERAs worked to 5 thou and Shipwrights worked to the nearest dockyard.
__________________
Best Wishes, Alick
|
|
#1750
11th November 2023, 07:43
|
|||
|
|||
|
Is it Deja vu all over again?
|
| Post Reply |
|
|
Now that was funny
